Radio ham describes “nearly drowning” during space walk

Luca Parmitano KF5KDP / IR0ISS  on Expedition 36 EVA July 9, 2013 - Image credit ESA

Luca Parmitano KF5KDP / IR0ISS
on Expedition 36 EVA July 9, 2013 – Image credit ESA

“I can’t even be sure that the next time I breathe I will fill my lungs with air and not liquid”

These are the words of Luca Parmitano KF5KDP / IR0ISS describing his recent space walk during which his spacesuit leaked.

Read his blog – EVA 23: exploring the frontier
http://blogs.esa.int/luca-parmitano/2013/08/20/eva-23-exploring-the-frontier/

Radio Ham’s Leaky Spacesuit
https://amsat-uk.org/2013/07/31/radio-hams-leaky-spacesuit/

Astronaut Luca Parmitano KF5KDP talks about his ham radio contacts
https://amsat-uk.org/2013/08/14/astronaut-luca-parmitano-kf5kdp-talks-about-his-ham-radio-contacts/

Huffington Post – Astronaut Luca Parmitano Recounts Nearly Drowning During Spacewalk
http://www.huffingtonpost.com/2013/08/20/luca-parmitano-spacewalk-drowning_n_3786645.html

Radio ham VK3FADO in The Age newspaper

ArduSatThe Age newspaper reports on Jonathan Oxer VK3FADO who has been developing the ArduSat CubeSats which carry amateur radio payloads

The article, by Ben Grubb, says for the past 10 months, Jon VK3FADO has been involved in designing and building two crowd-funded micro-satellites that will allow anyone to conduct their own space experiments.

Named ArduSat-1 and ArduSat-X, the low-cost, miniature satellites are aboard the International Space Station ready to be put into orbit between October and March 2014.

Read the full article at
http://www.theage.com.au/technology/sci-tech/to-let-your-own-tiny-piece-of-space-young-einsteins-welcome-20130819-2s7bh.html

ArduSat Open Source Ham Radio CubeSats
https://amsat-uk.org/2013/08/09/ardusat-open-source-ham-radio-cubesats/

Astronaut Luca Parmitano KF5KDP talks about his ham radio contacts

Luca Parmitano KF5KDP on Expedition 36 EVA July 9, 2013 - Image credit ESA

Luca Parmitano KF5KDP on Expedition 36 EVA July 9, 2013 – Image credit ESA

On his ESA blog astronaut Luca Parmitano KF5KDP talks about his ham radio contacts from the International Space Station.

I set the radio to the ‘random’ contacts frequency, and without knowing what to expect, I put on the headphones. Physically, the International Space Station was still many kilometres away from the coastlines of Europe, but our horizon stretches out beneath us for thousands of kilometres and the various European ground stations could already see us. My ears were immediately overwhelmed by a cacophony of unidentifiable sounds and noises, voices, screeching and white noise. Then suddenly, a voice surfaced above the other sounds; it was a young man, in my mind barely more than a boy. He was calling the ISS American radio call sign (NA1SS) and repeating his own call sign. I was taken aback by the emotion that rose in me as I tried to reply to the call, using the Italian call sign (IR0ISS). But my excitement was nothing compared to the sheer astonishment and disbelief I heard in that voice, thousands of kilometres away. Speaking English with a beautiful Portuguese accent, the radio operator on the other side of the signal only managed to say a few words – “I don’t know what to say… This is a dream come true for me!” – before our conversation was interrupted and buried by swarms of other calls.

Read the blog at http://blogs.esa.int/luca-parmitano/2013/08/13/message-in-a-bottle/

Astronaut Luca Parmitano KF5KDP making ham radio contacts
https://amsat-uk.org/2013/08/12/astronaut-luca-parmitano-kf5kdp-making-ham-radio-contacts/

Astronaut Luca Parmitano KF5KDP making ham radio contacts

Luca Parmitano KF5KDP on Expedition 36 EVA July 9, 2013- Image credit ESA

Luca Parmitano KF5KDP on Expedition 36 EVA July 9, 2013- Image credit ESA

ESA astronaut Luca Parmitano KF5KDP has been making random voice contacts from the International Space Station (ISS) to other radio amateurs on Earth on 145.800 MHz.

When the astronauts put out a CQ call, in range of Europe and Africa, they transmit on 145.800 MHz FM but operate “split” listening for replies 600 kHz lower on 145.200 MHz. If you are lucky and hear them calling CQ just remember to activate your rigs repeater shift to ensure you reply on the correct frequency. You should never transmit on 145.800 MHz.

The International Space Station is traveling around the Earth at over 28,000 Km/h. This high speed makes radio signals appear to shift in frequency, a phenomenon called Doppler Shift.

This Doppler shift will cause the ISS transmit frequency of 145.800 MHz to look as if it is 3.5 kHz higher in frequency, 145.8035, when ISS is approaching your location. During the 10 minute pass the frequency will move lower shifting a total of 7 kHz down to 145.7965 as the ISS goes out of range. To get maximum signal you ideally need a radio that tunes in 1 kHz or smaller steps to follow the shift but in practice acceptable results are obtained with the radio left on 145.800 MHz.

In the UK we use narrow 2.5 kHz deviation FM but the ISS transmits using the wider 5 kHz deviation used in much of the world. Most rigs can be switched been wide and narrow deviation filters so select the wider filter. Hand-held rigs all seem to have a single wide filter fitted as standard.

You can receive the ISS outdoors using a 2 metre hand-held with its helical antenna but a 1/4 wave whip will give far better results.

For the current status of the amateur radio stations on the ISS see http://www.issfanclub.com/

Cor PD0RKC reports “On Monday, August 5, 2013 I had a short contact with Luca, anyone made an audio recording? Please send it to my e-mail address see QRZ.com. Thanks in advance!”

ArduSat Open Source Ham Radio CubeSats

ArduSat

Australian Foundation radio amateur Jonathan Oxer VK3FADO is one of the designers of the two CubeSats ArduSat-1 and ArduSat-X which arrived at the ISS on Friday, August 9 UT.

The Arduino-powered satellites were transported to the International Space Station by the Japanese HTV-4 cargo vessel along with the PicoDragon and TechEdSat-3 CubeSats and the HamTV transmitter.

The ArduSat’s will be deployed from the ISS by the Kibo robot arm sometime between October 2013 and March 2014. They are expected to have a lifetime of 7 months before burning up in Earth’s atmosphere.

An article in The Register by Simon Sharwood says

Jonathan Oxer, one of the satellites’ designers, says serious science is one aim of the project, its main goal is “ is to inspire hobbyists and school students to learn about space technology, beginning with simple experiments using cheap Arduino boards in their classroom and then seamlessly transitioning to running those same experiments in space on a real satellite.”

That experience, he hopes, will see them take pursue studies in technical fields and over time address skills shortages.

Oxer hopes to release designs for the ASPPM.

“The design of the payload will also be released under the TAPR Open Hardware License, as soon as I have a clear path to do it without falling afoul of the laws restricting international arms trade [ITAR],” he told The Reg. “That’s actually quite a problem because satellite technology is classified as a weapon, no matter what its purpose is.”

Read the full Register article Open source ‘Cubesat’ set to soar at
http://www.theregister.co.uk/2013/08/09/arduino_powered_cubesats_arrive_at_iss_on_saturday/

Watch a video of Jon Oxer VK3FADO talking about the ArduSat CubeSats at
http://science.slashdot.org/story/13/08/08/179222/jon-oxer-talks-about-the-ardusats-that-are-on-the-way-to-iss-video

The International Traffic in Arms Regulations (ITAR) were introduced by the US Federal Government. ITAR threatens US radio amateurs with up to six figure fines or jail if they talk to non-US citizens about certain aspects of their amateur satellite hobby. These draconian regulations have stopped cooperation on amateur satellite projects between US hams and the rest of the world.

Read AMSAT Wants Amateur Radio Satellites Off US Munitions List
https://amsat-uk.org/2013/07/31/amsat-wants-amateur-radio-satellites-off-us-munitions-list/

The amateur radio group TAPR developed the TAPR Open Hardware License (“OHL”) to provide a framework for hardware projects that is similar to the one used for Open Source software  http://www.tapr.org/OHL

Among the other radio amateurs who’ve been working on ArduSat are Jeroen Cappaert KK6BLQ and Joel Spark KK6ANB, both hold the USA equivalent of UK and Australian Foundation licences.

ArduSat Arduino CubeSat Technical Details https://amsat-uk.org/2012/06/20/ardusat-arduino-cubesat-technical-details/

HamTV transmitter launched to ISS https://amsat-uk.org/2013/08/03/hamtv-transmitter-launched-to-iss/

Kibo Robot Arm CubeSat Deployment

Kibo Robot Arm CubeSat Deployment

HamTV transmitter launched to ISS

Front panel of the HamTV transmitter

Front panel of the HamTV transmitter

On Saturday, August 3 at 1948 UT the Japanese HTV-4 cargo vessel was successfully launched to the International Space Station (ISS). On-board were the HamTV transmitter and four CubeSats carrying amateur radio payloads.

PicoDragon CubeSat - Image credit VNSC

PicoDragon CubeSat – Image credit VNSC

The CubeSats will be deployed from the ISS by the JEM Small Satellite Orbital Deployer (J-SSOD) between October 2013 and March 2014, they are:
•    PicoDragon a 1U CubeSat developed by Vietnam National Satellite Center (VNSC), University of Tokyo and IHI aerospace. 437.250 MHz CW beacon and 437.365 MHz 1200 bps AFSK AX.25 telemetry.
•    ArduSat-1 developed by NanoSatisfi. 437.325 MHz 9k6 MSK CCSDS downlink.
•    ArduSat-X developed by NanoSatisfi. 437.345 MHz 9k6 MSK CCSDS downlink .
•    TechEdSat-3 developed by interns at the NASA Ames Research Center. 437.465 MHz 1200 bps packet radio beacon transmitting 1 watt to 1/4 wave monopole. It plans to test an Iridium Satphone modem and has a deployment mechanism to de-orbit in 10 days.

They are 1U in size (10*10*10 cm) except for TechEdSat-3 which is 3U (30*10*10 cm).

The company NanoRack has announced it is sending 36 Units of CubeSats to the ISS (believed to be 26 separate CubeSats, some 2U or 3U in size). At the time of writing it is believed they will be going on a later cargo vessel.

A basic amateur radio station that should be able to receive HamTV from ISS - Image AMSAT-Italia

A basic amateur radio station that should be able to receive HamTV from ISS – Image AMSAT-Italia

The HamTV transmitter is the culmination of over ten years work to establish an amateur radio TV transmitter on the ISS. It will use patch antennas fixed on the Meteorite Debris Panels (MDP) protecting the hull of the ISS Columbus module. These antennas were installed while Columbus was being constructed. A fund-raising campaign took place during 2005-7 to raise over 65,000 Euros for the antennas. Individual radio amateurs from around the world donated generously as did several organisations such as AMSAT-UK and the RSGB.

The transmitter will be installed in the Columbus module in the coming months. It can transmit DVB-S signals on 2422.0 MHz or 2437.0 MHz at either 1.3 Msps or 2.3 Msps with 10 watts of RF output.

The main mission of HamTV is to perform contacts between the astronauts on the ISS and school students, not only by voice as now, but also by unidirectional video from the ISS to the ground.

In addition to school contacts the equipment is capable of transmitting other pre-recorded video up to 24 hours a day to allow ground stations tuning.

HamVideo is the name of the onboard DATV S-band transmitter. HamTV is the name of the complete system, comprising DATV downlink and VHF voice uplink. Kaiser Italia SRL was the prime-contractor for the design and development of the flight and ground segment http://www.kayser.it/index.php/exploration-2/ham-tv

Read the HamTV overview paper at http://tinyurl.com/HamTVoverview

HamTV Link Budget http://www.amsat.it/Amsat-Italia_HamTV.pdf

HamTV on Facebook https://www.facebook.com/Hamtvproject

ARISS DATV Antennas Installed on Columbus http://www.ariss-eu.org/columbus.htm

ArduSat for UK Schools
https://amsat-uk.org/2013/04/13/ardusat-for-uk-schools/

ArduSat Arduino CubeSat Technical Details
https://amsat-uk.org/2012/06/20/ardusat-arduino-cubesat-technical-details/

Spaceflight story – Japan’s HTV-4 launches supplies and science to the ISS
http://www.nasaspaceflight.com/2013/08/japans-htv-4-launches-supplies-scienceiss/

HTV-4 launch - Image credit JAXA