The Surrey Space Centre in Guildford has released a ‘Softstack’ Integration time-lapse video of the SME-SAT CubeSat.
The mission objectives are:
A: Outreach – The satellite will provide beacons for which amateur satellite users and ham radio users will be able to receive.
B: Space qualification and performance characterisation of sensors.
• High performance COTS Gyroscopes (x3).
• High precision MEMS accelerometers.
• 2 Aperture Star Camera, At a later point in the mission these will be used in conjunction with the ADCS to characterise the closed loop performance of the sensors.
C: Performance characterisation of Nano-Control Moment Gyros (CMGs) for agility. The mission is equipped with 4-Nano-CMGs in a pyramid configuration for ADCS. This part of the mission will evaluate the performance of this system on the ADCS and agility of the satellite.
D: Space qualification and performance characterisation of the EPS The EPS for this mission has heritage from the Delfi-C3 and other missions and includes additional improvements to be demonstrated on this mission.
E: Smart Thermal Radiation Devices (STRD tiles) SME-SAT is equipped with a number of STRD tiles on the outside faces of the satellite for passive thermal management of the internal structure.
F: Flux Gate Magnetometer The mission contains a scientific grade miniaturized flux gate magnetometer that sits on the end of a deployable boom to improve the performance of the sensor. This payload will be switched into the ADCS for evaluation of performance during parts of the mission but is not the primary magnetometer for ADCS.
G: GPS SME-SAT also contains an experimental GPS system that will be switched into the ADCS loop at stages in the orbit to evaluate the performance of the system.
The IARU coordinated frequency for the satellite’s 9k6 RC-BPSK AX.25 downlink is 437.150 MHz.
Watch SMESAT CubeSat ‘Softstack’ Integration at Surrey Space Centre (Time Lapse)
More information here
You must be logged in to post a comment.