ISS CubeSats deployed Monday, October 5

Deployment of AAUSat-5 and GomX-3 from the ISS - Credit NASA, NanoRacks

Deployment of AAUSat-5 and GomX-3 from the ISS – Credit NASA, NanoRacks

Two Danish CubeSats carrying amateur radio payloads were successfully deployed from the International Space Station (ISS) on Monday, October 5 at 1405 UT.

AAUSat-5 and Deployer - Credit ESA

AAUSat-5 and Deployer – Credit ESA

Originally launched to the ISS on August 19, 2015, the two CubeSats, AAUSat-5 and GomX-3, were deployed from the ISS Japanese Kibo module airlock using the Kibo robotic arm.

After deployment the CubeSats stated transmitting signals to Earth that can be picked up by anyone with common amateur radio equipment. The frequencies to listen on are:

• AAUSat-5 – 437.425 MHz with 30 WPM CW beacon every 3 minutes and 9600 bps GMSK packet every 30 seconds

• GomX-3 – 437.250 MHz with 1200-9600 bps GMSK data using CSP protocol

AAUSat-5 received by Jan van Gills PE0SAT on October 5, 2015 at 1800 UT

AAUSat-5 received by Jan van Gills PE0SAT on October 5, 2015 at 1800 UT

AAUsat-5 is a 1-Unit CubeSat built by students at Aalborg University. The primary mission is to test an improved receiver for detecting Automatic Identification System (AIS) signals emitted by ships. Down on the ground, these signals are short-range, operating mainly on a ship-to-shore and ship-to-ship basis, leaving large spans of the world’s oceans uncovered. But signals also travel up to orbital altitude, opening up the prospect of worldwide monitoring.

GomX-3 is a 3-Unit CubeSat which aims to demonstrate new radio technology. A reconfigurable software-defined radio receiver will intercept L-band spot beams from telecom satellites in geostationary orbit, to provide independent measurements of their signal strength and quality. This receiver can also be repurposed to receive any other L-band signal, such as navigation satellite signals or radar beams.

A receiver will pick up Automatic Dependent Surveillance – Broadcast (ADS-B) signals automatically broadcast by civilian aircraft, to build up an overview of regional air traffic.

GomX-3 received by Mineo Wakita JE9PEL October 5, 2015 from 1505-1515 UT

GomX-3 received by Mineo Wakita JE9PEL October 5, 2015 from 1505-1515 UT

Additionally there is a high data rate X-band transmitter developed by Syrlinks. The CNES X-band ground station in Kourou, South America, will be used to demonstrate the link.

The GomX-3 amateur radio payload uses a NanoCom AX100 UHF transceiver and ANT430 antenna.

Mineo Wakita JE9PEL in Japan reported receiving the GomX-3 beacon in Japan from 1505-1510 UT on October 5 and Luciano Fabricio PY5LF reported hearing GomX-3 in Brazil at 1605 UT. Jan van Gills PE0SAT in the Netherlands received AAUSat-5 at 1800 UT.

The two spacecraft may have a lifetime of around 7 months before they burn up in the Earth’s atmosphere.

GomX-3 telemetry beacon https://www.dropbox.com/s/x4mipoz9gmqhlib/GOMX3_Beacon.pdf

AAUSat-5 telemetry beacon http://www.space.aau.dk/aausat5/index.php?n=Main.HamInfo

ESA article CubeSats set for Monday Release (with video)
http://www.esa.int/Our_Activities/Space_Engineering_Technology/ESA_CubeSats_set_for_Monday_release

ESA invites radio amateurs to listen for AAUSat-5 CubeSat
https://amsat-uk.org/2015/09/24/esa-listen-for-aausat-5/

Deployment of AAUSat-5 and GomX-3 from the ISS Kibo robot arm - Credit NASA, NanoRacks

Deployment of AAUSat-5 and GomX-3 from the ISS Kibo robot arm – Credit NASA, NanoRacks

ESA invites radio amateurs to listen for AAUSAT-5 CubeSat

AAUSat-5 and Deployer - Credit ESA

AAUSat-5 and Deployer – Credit ESA

The AAUSAT-5 amateur radio CubeSat built by students at the University of Aalborg, Denmark is planned to be released from the International Space Station sometime in the week of October 5.

The European Space Agency (ESA) is inviting radio amateurs to listen out for the signals from the satellite. The first to send in a recorded signal from AAUSAT-5 will receive a prize from ESA’s Education Office.

Launched on August 19, 2015 to the ISS, the Danish student CubeSat is now waiting for its deployment from the Japanese Kibo module’s airlock. An astronaut will manipulate the Kibo robotic arm to lift AAUSAT-5 from the airlock and place it in orbit.

Once deployed from the ISS the CubeSat will begin transmitting signals to Earth that can be picked up by anyone with common amateur radio equipment. ESA challenges anyone to record the signal and send it to ESA (cubesats@esa.int) and Aalborg University (studentspace@space.aau.dk).

The satellite will transmit on 437.425 MHz using CW and GMSK. The 30 WPM CW beacon will transmit every 3 minutes and the 9600 bps GMSK every 30 seconds.

The first correct email received will win the following prizes:
• ESA/AAUSAT5 poster with signatures of the team members
• ESA Education goodie bag
• Scale 1:1 3D printed model of the AAUSAT-5 satellite

Read the ESA article at
http://www.esa.int/Education/CubeSats_-_Fly_Your_Satellite/Be_the_first_to_catch_the_signals_from_a_new_Satellite_in_orbit

AAUSAT-5 amateur radio information http://www.space.aau.dk/aausat5/index.php?n=Main.HamInfo

ESA AAUSAT-5 Twitter hashtag #AAUSAT5 https://twitter.com/ESA__Education

Danish CubeSats head for ISS https://amsat-uk.org/2015/08/19/danish-cubesats-head-for-iss/

Danish CubeSats head for ISS

GomX-3 being built - Credit ESA

GomX-3 being built – Credit ESA

Two CubeSats built in Denmark, GomX-3 and AAUSat-5, are on their way to the International Space Station.

Danish Astronaut Andreas Mogensen KG5GCZ and Murray Niman G6JYB

Danish Astronaut Andreas Mogensen KG5GCZ and Murray Niman G6JYB

Japan’s fifth H-II Transfer Vehicle blasted off from Tanegashima Space Center on Wednesday, August 19 at 1150 UT. The HTV-5 is expected to arrive at the ISS on August 24 and the CubeSats will be unloaded for later deployment.

The 3 Unit CubeSat GomX-3 is part of the outreach programme for the visit of the Danish astronaut, Andreas Mogensen KG5GCZ @Astro_Andreas, to the ISS. His Soyuz spacecraft is expected to launch on September 2. The project is supported and coordinated with ESA and the Danish Ministry of Science and Education.

A number of outreach activities are being planned that will involve schools, radio amateur societies and social media both during the astronaut mission and continuing with the CubeSat mission. The IARU have coordinated 437.250 MHz for the 1k2-9k6 bps beacon.

AAUSat-5 and Deployer - Credit ESA

AAUSat-5 and Deployer – Credit ESA

AAUsat-5 is a 1 Unit CubeSat built by students at Aalborg University. The primary mission is to test an improved receiver for detecting Automatic Identification System signals emitted by ships. Down on the ground, these signals are short-range, operating mainly on a ship-to-shore and ship-to-ship basis, leaving large spans of the world’s oceans uncovered. But signals also travel up to orbital altitude, opening up the prospect of worldwide monitoring. The IARU have coordinated 437.425 MHz for the GMSK beacon.

Once deployed the two spacecraft may have a lifetime of around 6-9 months before they burn up in the Earth’s atmosphere.

Watch AAUSAT5 CubeSat mission from the International Space Station

Andreas attended the 2009 AMSAT-UK International Space Colloquium in Guildford.

Andreas Mogensen KG5GCZ http://andreasmogensen.esa.int/

IARU coordinated satellite frequencies information is at http://www.amsatuk.me.uk/iaru/finished.php

Related ESA stories:
http://www.esa.int/Education/Student_satellite_wins_green_light_for_Station_deployment
http://www.esa.int/Our_Activities/Space_Engineering_Technology/Technology_CubeSat_hitch-hiker_on_today_s_HTV_launch