| Supporting Organisation | Ministry of Science, Technology & Productive Innovation | |||
| Contact Person | norberto.wente.dk.nospam
|
|||
| Headline Details: CubeBug-1 is the first technology demonstration mission for a new cubesat platform design (mechanics, hardware and software) intended to be released as Open Source and Open Hardware for its use in Amateur projects, University projects and research labs. This projectis sponsored by the Argentinian Ministry of Science, Technology and Productive Innovation. As payload on this first mission, some custom designed components will be tested: an ARM based on-board computer, a nano-reaction wheel with its driver circuit and a low resolution camera, all based on COTS components. Planning to use half duplex communications on UHF with 9k6 GMSK data. CubeBug-1 is a 2U cubesat and isexpected to be launched as part of a group of cubesats in a DNEPR rocket launch planned for September 2012 from Yasny into a 607km 98 degree polar orbit. After the technology demonstration part of the mission is over, the satellite will enter a mode that will include services to the Amateur radio community, including a Digipeater, science data downloads from the payload (including images if possible), etc. | ||||
| Application Date: | 01 May 2012 | Freq coordination completed on | ||
|
The IARU Amateur Satellite Frequency Coordination Status pages are hosted by AMSAT-UK as a service to the world wide Amateur Satellite Community
|
AMSAT-UK 