First picture taken by ESTCube-1 CubeSat amateur radio callsign ES5E

ESTCube-1_first_picture_from_space

The first picture taken by the amateur radio CubeSat ESTCube-1 in space has been released. ESTCube-1 was launched from Kourou in the Caribbean on May 7 at 0206 UT on an ESA Vega rocket into a 704 km orbit.

ESTCube-1 camera on left of board

ESTCube-1 camera on left of board

The hard work of the first two weeks has paid off and the CAM team, leaded by the University of Tartu Computer Technology graduate student Henri Kuuste has this to say: The camera works perfectly and so do all the other subsystems, needed for taking the photo. The first image was captured on May 15 over the Mediterranean Sea, showing the sea, Sahara desert, and Tunisia.

On Monday, May 13 the whole ESTCube-1 team was invited to the reception of the rector of University of Tartu to celebrate the success of the satellite. Watch the video (in English) at http://www.uttv.ee/naita?id=17163

ESTCube-1 at press conference in Tallinn before shipping January 21, 2013 - Image credit University of Tartu

ESTCube-1 at press conference in Tallinn before shipping January 21, 2013 – Image credit University of Tartu

ESTCube-1 was built by students at the University of Tartu. The main mission of the satellite is to test electric solar wind sail technology, a novel space propulsion technology that could revolutionize transportation within the solar system. It will deploy a 10 meter conductive electrodynamic tether and the force interacting with the tether will be measured.

The technology is based on the electrostatic interaction between the electric field generated by the satellite and the high-speed particles being ejected from the Sun. A spacecraft utilizing this method would first deploy a set of electrically charged wires, which allow to generate an electric field over a large area. This area effectively forms a “sail” that can be pushed by the charged particles being diverted by it and therefore transferring momentum to the craft.

ESTCube-1 uses these frequencies:
437.252 MHz – CW beacon, callsign ES5E/S
437.505 MHz – 9600 bps AX.25 telemetry, callsign ES5E-11

Watch ESTCube-1 mission

Electric solar wind sail http://www.electric-sailing.fi/

EstCube on Facebook https://www.facebook.com/estcube/

EstCube website http://www.estcube.eu/en/home

Wiki EstCube-1 http://tinyurl.com/WikiESTCube-1

Keplerian Two Line Elements (TLEs) ‘Keps’ for CubeSats are at
http://celestrak.com/NORAD/elements/cubesat.txt

Free satellite tracking software:
• SimpleSat Look Down http://www.tomdoyle.org/SimpleSatLookDown/
• Gpredict http://gpredict.oz9aec.net/
• Orbitron http://www.uk.amsat.org/?p=9051

ESTCube-1 – Estonia’s First CubeSat

Vega VV02 lift-off from Kourou on May 7, 2013 at 02:06 UT

Vega VV02 lift-off from Kourou on May 7, 2013 at 02:06 UT

Estonia’s first CubeSat ESTCube-1, amateur radio callsign ES5E, was launched from Kourou in the Caribbean on May 7 at 0206 UT on an ESA Vega rocket into a 704 km orbit. Also on the same launch were Vietnam’s VNREDSat-1A and ESA’s Proba‑V satellites.

ESTCube-1 - Image credit University of Tartu

ESTCube-1 – Image credit University of Tartu

This Vega mission required five upper-stage boosts and lasted about twice as long as its first launch, in February 2012.

The three solid-propellant stages performed flawlessly and, after two burns of the liquid-propellant upper stage, Proba‑V was released into a circular orbit at an altitude of 820 km, over the western coast of Australia, some 55 minutes into flight.

After releasing Proba-V, the upper stage performed a third burn and the top half of the egg-shaped Vega Secondary Payload Adapter was ejected. After a fourth burn to circularize the orbit at an altitude of 704 km, VNREDSat-1A was released 1 hour 57 minutes into flight. ESTCube‑1 was ejected from its dispenser three minutes later.

ESTCube-1 was built by students at the University of Tartu. The main mission of the satellite is to test electric solar wind sail technology, a novel space propulsion technology that could revolutionize transportation within the solar system. It will deploy a 10 meter conductive electrodynamic tether and the force interacting with the tether will be measured.

ESTCube-1 at press conference in Tallinn before shipping January 21, 2013 - Image credit University of Tartu

ESTCube-1 at press conference in Tallinn before shipping January 21, 2013 – Image credit University of Tartu

The technology is based on the electrostatic interaction between the electric field generated by the satellite and the high-speed particles being ejected from the Sun. A spacecraft utilizing this method would first deploy a set of electrically charged wires, which allow to generate an electric field over a large area. This area effectively forms a “sail” that can be pushed by the charged particles by being diverted by it and therefore transferring momentum to the craft.

The team also aim to capture images of Estonia for outreach purposes.

The IARU Amateur Satellite Frequency Coordination Panel have published these frequencies for ESTCube-1
437.250 MHz – CW beacon, callsign ES5E/S
437.505 MHz – 9600 bps AX.25 telemetry, callsign ES5E-11

The CW beacon has been received slightly high of the published frequency on 437.2515 MHz (+/- Doppler shift). Among those reporting the signal have been Nader Omer ST2NH in Sudan, Mike Rupprecht DK3WN in Germany, and Hector Martinez CO6CBF in Cuba who was using an AMSAT-UK FUNcube Dongle SDR.

Watch Estonian’s ESTCube-1

Watch Exploded view of ESTCube-1

Electric solar wind sail http://www.electric-sailing.fi/

EstCube on Facebook https://www.facebook.com/estcube/

EstCube website http://www.estcube.eu/en/home

Wiki EstCube-1 http://tinyurl.com/WikiESTCube-1

ESA report on launch and deployment
http://www.esa.int/For_Media/Press_Releases/ESA_s_Vega_launcher_scores_new_success_with_Proba-V

Keplerian Two Line Elements (TLEs) ‘Keps’ for new satellites launched in past 30 days
http://celestrak.com/NORAD/elements/tle-new.txt

Keplerian Two Line Elements (TLEs) ‘Keps’ for CubeSats are at
http://celestrak.com/NORAD/elements/cubesat.txt

Free satellite tracking software:
• SimpleSat Look Down http://www.tomdoyle.org/SimpleSatLookDown/
• Gpredict http://gpredict.oz9aec.net/
• Orbitron http://www.uk.amsat.org/?p=9051

ESTCube Ground Station Antennas

ESTCube Ground Station Antennas

ESTCube-1 – Estonia’s First CubeSat

ESTCube-1 - Image credit University of Tartu

ESTCube-1 – Image credit University of Tartu

Estonia’s first CubeSat ESTCube-1, amateur radio callsign ES5E/S, is planning to launch from Kourou in the Caribbean on May 4 at 0206 UT on an ESA VEGA rocket. Watch the launch live.

Built by students at the University of Tartu ESTCube-1 the main mission of the satellite is to test electric solar wind sail technology, a novel space propulsion technology that could revolutionize transportation within the solar system. It will deploy a 10 meter conductive electrodynamic tether and the force interacting with the tether will be measured.

The technology is based on the electrostatic interaction between the electric field generated by the satellite and the high-speed particles being ejected from the Sun.  A spacecraft utilizing this method would first deploy a set of electrically charged wires, which allow to generate an electric field over a large area. This area effectively forms a “sail” that can be pushed by the charged particles by being diverted by it and therefore transferring momentum to the craft.

The team also aim to capture images of Estonia for outreach purposes.

The IARU Amateur Satellite Frequency Coordination Panel have published these frequencies for ESTCube-1
437.250 MHz – CW beacon, callsign ES5E/S
437.505 MHz – 9600 bps AX.25 telemetry, callsign ES5E-11

Watch Estonian’s ESTCube-1

Electric solar wind sail http://www.electric-sailing.fi/

EstCube http://www.estcube.eu/en/home

Wiki EstCube-1 http://tinyurl.com/WikiESTCube-1

ESTCube-1 Tether Satellite

Artists impression of ESTCube-1 in space - Image credit University of Tartu

Artists impression of ESTCube-1 in space – Image credit University of Tartu

Estonia’s first CubeSat ESTCube-1, amateur radio callsign ES5E/S, is planning to launch from Kourou in the Caribbean on May 2, 2013 on an ESA VEGA rocket.

Built by students at the University of Tartu ESTCube-1 the main mission of the satellite is to test electric solar wind sail technology, a novel space propulsion technology that could revolutionalize transportation within the solar system. It will deploy a 10 meter conductive electrodynamic tether and the force interacting with the tether will be measured.

The technology is based on the electrostatic interaction between the electric field generated by the satellite and the high-speed particles being ejected from the Sun. A spacecraft utilizing this method would first deploy a set of electrically charged wires, which allow to generate an electric field over a large area. This area effectively forms a “sail” that can be pushed by the charged particles by being diverted by it and therefore transferring momentum to the craft.

The team also aim to capture images of Estonia for outreach purposes.

Continue reading

ESTCube-1 Tether Satellite hopes for Spring launch

Artists impression of ESTCube-1 in space - Image credit University of Tartu

Artists impression of ESTCube-1 in space – Image credit University of Tartu

Estonia’s first CubeSat ESTCube-1, amateur radio callsign ES5E/S, is planning to launch from Kourou in the Caribbean in the Spring on an ESA VEGA rocket.

Built by students at the University of Tartu ESTCube-1 the main mission of the satellite is to test electric solar wind sail technology, a novel space propulsion technology that could revolutionalize transportation within the solar system. It will deploy a 10 meter conductive electrodynamic tether and the force interacting with the tether will be measured.

The technology is based on the electrostatic interaction between the electric field generated by the satellite and the high-speed particles being ejected from the Sun.  A spacecraft utilizing this method would first deploy a set of electrically charged wires, which allow to generate an electric field over a large area. This area effectively forms a “sail” that can be pushed by the charged particles by being diverted by it and therefore transferring momentum to the craft.

The team also aim to capture images of Estonia for outreach purposes.

Continue reading

Tethersat-1 & 2 to test Electrodynamic Tether Propulsion

Illustration of the EDT concept – image Wiki

 

The amateur radio satellite Tethersat is a 3U CubeSat that splits into two joined by a 1 km tether to test electrodynamic tether propulsion.

Both spacecraft will use 9600 bps AX25 GFSK packet downlinks on UHF. A launch is planned on ORS-3 in July 2013 from the Wallops Flight Facility on Wallops Island, Va.

Electrodynamic tether propulsion propulsion has the potential to make space travel significantly cheaper. It is a simplified, very low-budget magnetic sail. It can be used either to accelerate or brake an orbiting spacecraft. When direct current is pumped through the tether, it exerts a Lorentz force against the magnetic field, and the tether accelerates the spacecraft.

Potentially this technique could be used to raise the orbit of a satellite from 600 to 1000 km using a Ward Spiral maneuver. See the 2009 paper Tethered Satellite Dynamics, Mission Design and Applications by Chadwick Healy http://ccar.colorado.edu/asen5050/projects/projects_2009/healy/

Wiki http://en.wikipedia.org/wiki/Electrodynamic_tether

IARU Satellite Frequency Coordination Panel status http://www.amsat.org.uk/iaru