Ham Radio CubeSat FITSAT-1 becomes a “Shooting Star”

FITSAT-1 used LED's to signal in Morse code

FITSAT-1 used LED’s to signal in Morse code

The amateur radio CubeSat FITSAT-1, also known as NIWAKA, burnt up in the Earth’s atmosphere in the early hours of Thursday, July 4, 2013.

Image of ISS taken by the FITSAT-1 CubeSat after deployment

Image of ISS taken by the FITSAT-1 CubeSat after deployment

Takushi Tanaka JA6AVG of the Fukuoka Institute of Technology FITSAT project has issued this statement:

FITSAT-1 has decayed on July 4, 2013. The last signal was received by JA0CAW at 03:07(UT).

I appreciate all hams who joined our experiments, helped our operations, and sent me many reports.

I could make many friends in the world and enjoyed through FITSAT-1. Though FITSAT-1 became a shooting star,  I am very happy now.

Thank you very much again all Ham friends.

FITSAT-1 Flight Model

FITSAT-1 Flight Model

FITSAT-1, built by students at the Fukuoka Institute of Technology, was one of five CubeSats launched to the International Space Station (ISS) on July 21, 2012.

The CubeSats WE-WISH, TechEdSat, F-1, FITSAT-1 and RAIKO were integrated with the J-SSOD small satellite deployer on the the Japanese Experiment Module Kibo and deployed by the Kibo robotic arm on October 4, 2012 into a 420 km orbit.

Four of them, WE-WISH, TechEdSat, F-1 and FITSAT-1, have now de-orbited only RAIKO remains. The CubeSats that have de-orbited were all 1U in size (10x10x10 cm, 1-1.2 kg). The remaining CubeSat RAIKO is 2U in size, twice the volume and mass (20x10x10 cm, 2 kg).

Takushi Tanaka JA6AVG and FITSAT

Takushi Tanaka JA6AVG and FITSAT

FITSAT-1 carried a CW telemetry beacon on 437.250 MHz, a 1200 bps AX.25 packet radio transmitter on 437.445 MHz, a high-speed (115.2 kbps) data transmitter on 5840.0 MHz and an optical LED array to flash Morse code to observers on Earth.

The 5840.0 MHz transmitter on FITSAT-1 ran about 2 watts output. It supported a data rate of 115.2 kbps and sent a JPEG 640×480 VGA pictures in just 6 sec.

FITSAT-1’s low orbit meant its lifespan was limited to just 9 months but in that time it was able to achieve a number of technology firsts. Its success showed the outstanding design and construction abilities of the student team from the Fukuoka Institute of Technology.

Pictures Received on 5840 MHz from Amateur Radio Satellite FITSAT-1
https://amsat-uk.org/2013/01/08/pictures-received-on-5840-mhz-from-amateur-radio-satellite-fitsat-1/

FITSAT-1 Successfully Flashes Morse Code from Space
https://amsat-uk.org/2012/12/12/amateur-radio-cubesat-fitsat-1-successfully-flashes-morse-code-from-space/

FITSAT-1 website http://www.fit.ac.jp/~tanaka/fitsat.shtml

Further information and pictures of the CubeSats are at
https://amsat-uk.org/satellites/techedsat-f-1-fitsat-1-we-wish/

Amateur Radio CubeSats TechEdSat, F-1 and FITSAT-1 pass the ISS solar panels

Amateur Radio CubeSats TechEdSat, F-1 and FITSAT-1 pass the ISS solar panels

FITSAT-1 Ham Radio CubeSat to De-orbit by July 4 – Reports Requested

The five ISS CubeSats Altitude compared with ARISSat-1 - chart by Masa JN1GKZ

The five ISS CubeSats Altitude compared with ARISSat-1 – chart by Masa JN1GKZ

It is expected that the amateur radio CubeSat FITSAT-1, built by students at the Fukuoka Institute of Technology, will re-enter the Earths atmosphere and burn-up by Thursday, July 4.

FITSAT-1 QSL card GW1FKY - Front

FITSAT-1 QSL card received by Ken Eaton GW1FKY

FITSAT-1 and four other CubeSats were deployed from the Internatonal Space Station (ISS) on October 4, 2012. Three of them, WE-WISH, TechEdSat and F-1 have already de-orbited. All of the CubeSats were 1U in size (10x10x10 cm, 1-1.2 kg) except for RAIKO which is a 2U CubeSat twice the size and mass (20x10x10 cm, 2 kg).

Masahiro Arai JN1GKZ has produced a chart showing the decline in altitude of the five CubeSats and compares them with the far larger ARISSat-1 satellite deployed from the ISS on August 3, 2011.

As well as the CW telemetry beacon on 437.250 MHz FITSAT-1 also has a 1200 bps AX.25 packet radio transmitter on 437.445 MHz,  a high-speed (115.2 kbps) data transmitter on 5840.0 MHz and has flashed Morse code to observers on Earth using an LED array.

Takushi Tanaka JA6AVG requests that radio amateurs listen out for the CW telemetry beacon of FITSAT-1 on 437.250 MHz (+/- 10 kHz Doppler shift) during the last few days. Reception reports should be emailed to: tanaka at fit.ac.jp

FITSAT-1 website http://www.fit.ac.jp/~tanaka/fitsat.shtml

Further information and pictures of the CubeSats are at
https://amsat-uk.org/satellites/techedsat-f-1-fitsat-1-we-wish/

Free satellite tracking software:
• SimpleSat Look Down http://www.tomdoyle.org/SimpleSatLookDown/
• Gpredict http://gpredict.oz9aec.net/
• Orbitron http://www.uk.amsat.org/?p=9051

Keplerian Two Line Elements (TLEs) ‘Keps’ for CubeSats are at http://celestrak.com/NORAD/elements/cubesat.txt

Amateur Radio CubeSats TechEdSat, F-1 and FITSAT-1 pass the ISS solar panels

TechEdSat, F-1 and FITSAT-1 pass the ISS solar panels shortly after deployment

UK Radio Amateur Receives FITSAT-1 QSL Card

FITSAT-1 QSL card GW1FKY - FrontAMSAT-UK member Ken Eaton GW1FKY reports that he has received a QSL card confirming his reception of FITSAT-1.

On December 13 at 22:10:30 GMT FITSAT-1 will be using its optical LED beacon to flash a message in Morse Code over the British Isles and Europe which, cloud permitting, should be visible using binoculars. Further information is at http://www.uk.amsat.org/?p=11815

FITSAT-1 Successfully Flashes Morse Code from Space

(C) Tsuyoshi Watanabe Ebina City, Kanagawa Japan 1:24:23-1:24:25JST, 12 Dec 2012
Takahashi e160, Diameter short focus telescope 16cm (F=530mm, F3.3)
Nikon D800E, ISO12800, 2 seconds exposure

A test of the FITSAT-1 LED optical beacon that took place on December 11 GMT over Japan was successful.

On December 13 at 22:10:30 GMT FITSAT-1 will be using its optical LED beacon to flash a message in Morse Code over the British Isles and Europe which, cloud permitting, should be visible using binoculars. Further information is at http://www.uk.amsat.org/?p=11815

Continue reading

FITSAT-1 LEDs to Flash Morse Code over USA and Europe

Artistic impression of FITSAT-1 signaling in Morse code

On December 12-13 FITSAT-1 will be using its optical LED beacon to flash a message in Morse Code over the USA and the British Isles/Europe which should be visible using binoculars.

Continue reading

Amateur Radio Satellite to Flash Morse Code on Christmas Eve

FITSAT-1 plans to use LED’s to signal in Morse code

On Christmas Eve (Dec. 24) the Japanese students who built FITSAT-1 are planning to active the satellite’s LED optical array and flash a message in Morse code to Earth. The Morse message may be visible to the unaided eye.

According to Takushi Tanaka JA6AVG the students plan to start testing the optical system at the end of November.

The FITSAT-1 CubeSat was developed by students at the Fukuoka Institute of Technology (FIT) in Japan. In addition to the LED array it also has a CW beacon on 437.250 MHz, a data link on 437.445 MHz and a 5840.0 MHz data downlink.

Further FITSAT-1 information at http://www.fit.ac.jp/~tanaka/fitsat.shtml

CubeSats deployed from International Space Station http://www.uk.amsat.org/?page_id=10967