Whole Orbit Data from the FUNcube-1 (AO-73) amateur radio spacecraft can now be displayed.
Dave G4DPZ writes:
FUNcube-1 shows part of MSE experiment
We can now display 104 minutes of Whole Orbit Data captured within the satellite and we are working on getting the scaling factors such that all values can be displayed within the same range e.g. Volts instead on mV, Amps instead on mA. etc.
Part of the MSE experiment is nicely represent in the graph on the right:
Heating and cooling when the spacecraft is in sunlight as indicated by the Solar Cell (PV1) voltage.
We will be moving on to High Resolution data next and then mechanisms for downloading the data for local analysis.
These still seem to be the best fit but the team would appreciate any comments.
There is some discrepancy between the original published frequencies for the spacecraft and those we all experiencing in flight.
It is possible that the transponder input bandpass frequencies may also be varying due with the colder than expected temperatures being experienced.
You can track the RF board temp on the telemetry.The RX board temp varies by some 30 degrees C over a full orbit and this will be affecting the oscillator frequencies.
The team do not yet have final confirmation of the object number so the Doppler shift is probably not yet being precisely counteracted by the various Tracking Apps which will be adding to the confusion.
So just at the moment we cannot give precise guidance on the uplink/downlink formula that users should employ but the team are working on it and would appreciate input and observations.
Analysis of the housekeeping data suggests that all is well on-board FUNcube-1, the team are considering switching to continuous transponder mode for a few hours over the weekend to determine the effect that this would have to the on-board temperatures. Presently we are looking at trying this during an early morning pass over the UK on Sunday, December 1 but this will confirmed nearer the time.
FUNcube-1 has had some good media coverage from the BBC in the past few days:
John Besedic KK4EQF has released a video showing how easy it is to capture data from the FUNcube-1 (AO-73) amateur radio satellite using the Dashboard App, a computer, antenna and the FUNcube Dongle SDR.
Watch FUNcube Satellite Dashboard and FUNcube Dongle Amateur Radio
The Cajun Advanced Picosat Experiment satellite CAPE-2, built by students at the University of Louisiana at Lafayette, launched on a Monotaur-1 on November 20, 2013 at 0115 UT.
On November 24 Tetsurou Satou JA0CAW in Japan made this recording of CAPE-2′s Text to Speech functionality in action. The signal is weak, but it is saying: ”Hello I am the Satellite Project from the University of Louisiana at Lafayette” twice in the recording.
The CAPE-2 frequencies are 145.825 MHz FM and 437.325 MHz FSK. On the VHF FM frequency the beacon will be in CW and AX.25.
Update December 2, 2013:
Here is a link to all information the CAPE Team currently has for tracking the Satellite. A program will be released in the next few days to decode data.
On behalf of the CAPE-2 Team, we would really appreciate any data you can relay to us on the satellite.
Sincerely, Rizwan Merchant Call Sign: KF5BNL
Justin Foley KI6EPH produced this video of the Minotaur-1 launch from Wallops Flight Facility in Virginia. The ORS-3 mission carried STPSat-3 and 28 CubeSats. Of the CubeSats, 11 were provided by NASA LSP’s ELaNa 4 mission: CAPE-2, ChargerSat-1, COPPER, DragonSat, Ho’oponopono-2, KySat-2, PhoneSat, SwampSat, TJ3Sat, Trailblazer-1, Vermont Lunar CubeSat. Video taken from U-80, approximately 3.5 km (2.2 miles) from the launch pad.
Watch Minotaur I with STPSat-3 and 28 CubeSats 2013-11-19
WREN is transmitting nominally on 437.405 MHz (+/- 10 kHz Doppler shift). The length of the beacon is 1.6 seconds. The beacon is AFSK-modulated. At the following link you can download the Telemetry Decoder and an Audio File of the beacon in order to get an idea how it sounds:
You must be logged in to post a comment.