UKube-1: Art in Space

Artists impression of UKube-1 in orbit

Artists impression of UKube-1 in orbit – Credit Clyde Space

In addition to the amateur radio FUNcube boards the UK Space Agency’s first CubeSat UKube-1 will also carry designs by artists Jon Gibson and Amanda White, who run the famous iam8bit gallery in Los Angeles.

The Wired story says

“[Nanosatellites] open the door to do lots of different things in space,” says Clyde Space CEO Craig Clark. “Within five years I’d like to be making 100 nanosatellites a year”.

40 percent of CubeSat missions, which are satellites with a one-liter volume, carry Clyde Space hardware. The company has invested over £500,000 of its money into UKube-1, which will be the first satellite entirely assembled by them. 

“Craig Clark, the head honcho at Clyde Space, emailed us and said he was a fan of our work,” says Gibson (according to Clark, iam8bit’s art adorns the walls of the company’s offices). When Gibson and White realized that Clark was serious about them doing art with the satellite, “our faces lit up! To design something that’s going to orbit Earth — how cool is that?”

Read the full Wired story at http://www.wired.co.uk/news/archive/2013-08/13/pop-art-satellite-ukube1

Watch “Art in Space” – The Universe’s First Celestial Charging Station

Flight and Engineering Models of FUNcube-1 with FUNcube-2 boards

Flight and Engineering Models of FUNcube-1 with FUNcube-2 boards

UKube-1 will carry a set of AMSAT-UK FUNcube-2 boards which will provide:
• 1200 bps BPSK telemetry beacon on 145.915 MHz
• Linear transponder downlink 145.930-145.950 MHz for SSB/CW communications
• Linear transponder uplink 435.080-435.060 MHz

In addition UKube-1 also carries:
• ISIS 1200 bps BPSK telemetry beacon on 145.840 MHz
• UKSEDS myPocketQub 442 on 437.425-437.525 MHz with 11 mW output using spread spectrum
• 1 watt transmitter on 2401.0 MHz from Cape Peninsula University of Technology (CPUT), Cape Town, for high data rate mission data downlinking using up to 1 Mbps QPSK or OQPSK modulation

Gunter’s Space Page lists UKube-1 as manifested on a Soyuz-2-1b Fregat-M rocket. It is expected to be launched at the end of this year from Baikonur in Kazakhstan.

UKube-1 with Amateur Radio Transponder may launch October

Artists impression of UKube-1 in orbit

Artists impression of UKube-1 in orbit – Credit Clyde Space

BBC News is reporting that the UK Space Agency’s first CubeSat UKube-1, being built by Clyde Space in Glasgow, may launch in late October 2013.

Clyde Space Senior Systems Engineer Steve Greenland will be giving a presentation on UKube-1 to the AMSAT-UK International Space Colloquium which takes place July 20-21 at the Holiday Inn, Guildford, GU2 7XZ, UK.

The Colloquium is open to all but for those unable to attend the event all 18 presentations including UKube-1 will be web streamed live on the BATC site at http://batc.tv/ch_live.php?ch=3

Flight and Engineering Models of FUNcube-1 with FUNcube-2 boards

Flight and Engineering Models of FUNcube-1 with FUNcube-2 boards

UKube-1 will carry a set of AMSAT-UK FUNcube-2 boards which will provide:
• 1200 bps BPSK telemetry beacon on 145.915 MHz
• Linear transponder downlink 145.930-145.950 MHz for SSB/CW communications
• Linear transponder uplink 435.080-435.060 MHz

In addition UKube-1 also carries:
• ISIS 1200 bps BPSK telemetry beacon on 145.840 MHz
• UKSEDS myPocketQub 442 on 437.425-437.525 MHz with 11 mW output using spread spectrum
• 1 watt transmitter on 2401.0 MHz from Cape Peninsula University of Technology (CPUT), Cape Town, for high data rate mission data downlinking using up to 1 Mbps QPSK or OQPSK modulation

Gunter’s Space Page lists UKube-1 as manifested on a Soyuz-2-1b Fregat-M rocket to be launched from Baikonur in Kazakhstan.

FUNcube-1 flight model - Image credit Wouter Weggelaar PA3WEG

FUNcube-1 flight model – Image credit Wouter Weggelaar PA3WEG

If the launch does go ahead as planned in late October then the FUNcube-2 boards will be in orbit before the FUNcube-1 satellite which may launch in November, 2013 on a Dnepr rocket from Dombarovsky near Yasny.

FUNcube-1 will be using these frequencies:
• 1200 bps BPSK telemetry beacon on 145.935 MHz
• Linear transponder downlink 145.950-145.970 MHz for SSB/CW communications
• Linear transponder uplink 435.150-435.130 MHz

There will be a presentation on FUNcube-1 at the AMSAT-UK International Space Colloquium which will be streamed live to the web. The presentation schedule is here.

Read the BBC News story at http://www.bbc.co.uk/news/uk-scotland-glasgow-west-23319103

Watch UK Space Agency video – UKube-1 CubeSat payload animation

On Friday, October 19, 2012 after some final testing and characterisation checks completed at the facilities of ISIS BV in Delft, AMSAT-UK handed over the set of three PCBs that form the FUNcube-2 subsystem on the UKube-1 spacecraft to Clyde Space Ltd in Glasgow. Clyde Space are leading the development and assembly of this CubeSat project for the UK Space Agency.

Steve Greenland of Clyde Space receives the AMSAT-UK FUNcube-2 boards that will be incorporated into UKube-1

Steve Greenland of Clyde Space receives the AMSAT-UK FUNcube-2 boards that will be incorporated into UKube-1

The PCBs were taken to Glasgow in a Pelicase by Graham Shirville G3VZV who handed them to Steve Greenland Senior Systems Engineer at Clyde Space.

The three PCB’s comprise:
• CCT Board – Command, control and telemetry, interfaces via I2C with the antenna deployment system and the main OBC (On-Board Computer).
• RF Board – Command receiver, telemetry transmitter and linear transponder of the FUNcube satellite educational payload also includes telemetry sensors.
• PA Board – 400 mW VHF amplifier and sensors.

The telemetry transmitter provided by AMSAT-UK will be available for educational outreach to school students around the world.

UKube-1 on display at UK Space Conference in Glasgow

UKube-1 on display at UK Space Conference in Glasgow

UKube-1 to launch in June 2013

 

Artists impression of UKube-1 in orbit

Artists impression of UKube-1 in orbit – Credit Clyde Space

The Herald newspaper reports that the CubeSat UKube-1 will be launched in June, 2013.

The spacecraft is being built for the UK Space Agency (UKSA) by Clyde Space and the launch will take place from Baikonur in Kazakhstan on a Soyuz-2 along with TechDemoSat-1.

The newspaper reports that Clyde Space has announced plans for a base in the United States.

UKube-1 will carry a set of AMSAT-UK FUNcube boards to provide an amateur radio 435/145 MHz linear transponder and a 1200 bps BPSK beacon for educational outreach.

Continue reading

UKube-1 in The Herald newspaper

Artists impression of UKube-1 in orbit

Artists impression of UKube-1 in orbit – Credit Clyde Space

The UK Space Agency’s first Cube UKube-1, which is being built by Clyde Space, featured in The Herald on Monday, January 28.

UKube-1 will carry a set of AMSAT-UK FUNcube boards to provide an amateur radio 435/145 MHz linear transponder and a 1200 bps BPSK beacon for educational outreach.

Read the article at
http://www.heraldscotland.com/business/people/we-dont-encourage-entrepreneurship-here-the-attitude-is-get-a-good-job.19985957

Note in the article the orbit is quoted as being 3700 miles (5920 km) it is understood the correct altitude is between 600 and 800 km.

Watch the UKube-1 CubeSat payload animation at http://www.uk.amsat.org/?p=12334

Watch other UK Space Agency videos at http://www.youtube.com/user/spacegovuk

UKube-1 CubeSat Featured in SatMagazine

SatMagazine January 2013The January issue of the free publication SatMagazine features an article on the UK Space Agency’s first satellite UKube-1. It will carry an amateur radio subsystem and a launch on a Soyuz rocket is planned for the 3rd quarter of 2013.

The article on page 6 includes a picture of Steve Greenland of Clyde Space taking delivery of a set of AMSAT-UK FUNcube boards which will provide a 435/145 MHz linear transponder and a 145.915 MHz BPSK telemetry beacon for educational outreach.

Starting on page 24 is an article ‘Truly Educational Experiences… With Nanosats’ covering the University Nanosat program.

Download the January 2013 SatMagazine from http://www.satmagazine.com/2013/SM_Jan2013.pdf

Ukube-1 – Milton Keynes Cubesat Community Workshop January 22 http://www.uk.amsat.org/?p=11782

Clyde Space http://www.clyde-space.com/

UKube-1 Signs up for Launch and Completes Thermal Vacuum Testing

Clyde Space have successfully completed Thermal Vacuum Testing, where the UKube-1 Flight Model was operated in a simulated space environment (i.e. no air and at temperature extremes)

UKube-1 the UK Space Agency’s (UKSA) first satellite has ‘booked’ its journey into space on a Russian Soyuz-2 rocket. The launch from Baikonur in Kazakhstan is expected to take place in the 3rd quarter of 2013. UKube-1 has also completed Thermal Vacuum Testing to verify the spacecraft operation in a simulated space environment.

UKube-1 will carry a set of AMSAT-UK FUNcube boards to provide a 435/145 MHz linear transponder and a 145.915 MHz BPSK telemetry beacon for educational outreach.

Continue reading