NanoSatisfi founder Peter Platzer appeared on the Japanese NASDAQ TV feed to talk about the ArduSat satellite.
ArduSat is an open-source arduino-based nanosatellite. It will have an extensive sensor-suite onboard and will allow users to upload their own code and run their own experiments.
ArduSat will use a GomSpace NanoCom U482C which is a half-duplex UHF transceiver, capable of up to 3W, operating in the 435-438 MHz amateur radio satellite band. It implements Forward Error Correction (FEC) and Viterbi coding based on the CCSDS standards in order to improve reliability and throughput of the space link.
The project is raising donations through the Kickstarter site at http://nanosatisfi.com/ In just over a week they raised more than $43,000 in pledges from almost 300 donors.
Watch NanoSatisfi NASDAQ interview which is in English with Japanese sub-titles
Watch ArduSat Kickstarter Thank you
It is understanding the team are now aiming for a larger 2U CubeSat instead of the 1U originally planned.
ISIS CubeSat Structure Brochure http://www.isispace.nl/brochures/ISIS_CubeSat%20Structures_Brochure_v.7.11.pdf
ArduSat Arduino CubeSat Technical Details https://amsat-uk.org/2012/06/20/ardusat-arduino-cubesat-technical-details/
ArduSat Open Source CubeSat Next Phase in DIY Space Access http://www.uk.amsat.org/?p=8337
ArduSat Arduino CubeSat Update http://www.uk.amsat.org/?p=8284
NanoSatisfi was founded by Austrian-born Peter Platzer a former high-energy physicist (CERN), former Hedge Fund Quantitative Trader, avid HP-41 hacker and Arduino enthusiast, along with Belgian aerospace engineer Jeroen Cappaert intern at NASA Ames Research Center, Canadian aerospace engineer Joel Spark intern at EADS Astrium and Hungarian Reka Kovacs intern at NASA Ames Research Center working on alternative methods of public outreach for space science. The four founders met at the International Space University in Strasbourg and thought that they could do something to provide affordable, open-source space exploration for everyone.
You must be logged in to post a comment.