Tomsk-TPU-120 CubeSat – Credit Tomsk Polytechnic University

The amateur radio CubeSat Tomsk-TPU-120 may be deployed during a Russian spacewalk (EVA) in July 2017.

The satellite was developed by students at the Tomsk Polytechnic University to test new space materials technology and is the world’s first space vehicle with a 3D-printed structure. It was launched from Baikonur in Kazakhstan to the ISS on March 31, 2016 in a Progress-MS-2 cargo vessel.

It will be deployed by hand during a Russian spacewalk, which is why unlike other CubeSats this one has a handle. The call sign of the satellite is RS4S.

According to Alexey Yakovlev, head of the Tomsk Polytechnic University’s Institute of High Technologies, the 3D printed satellite is something of a landmark for additive manufacturing, being the first example of a fully 3D printed satellite: “The Tomsk-TPU-120 is the first such project in the world, in which the entire casing of a satellite is fully 3D printed using dynamic modeling,” Yakovlev recently told Sputnik. “The combination of these technologies can significantly reduce the development time and the number of full-scale tests, find new engineering solutions, and reduce the project’s cost.”

In May 2016 the Tomsk Polytechnic University celebrated its 120th anniversary. As part of the celebrations on May 10/11 the Tomsk-TPU-120 was activated in the ISS and transmitted a greeting to Earth inhabitants, recorded by students of the university in 10 languages: Russian, English, German, French, Chinese, Arabic, Tatar, Indian, Kazakh and Portuguese.

The greeting message was transmitted once a minute on 437.025 MHz FM. A Kenwood transceiver on the ISS provided a cross-band relay, re-transmitting the signal on 145.800 MHz FM.

Read the 3ders article at
http://www.3ders.org/articles/20161229-russian-scientist-says-3d-printed-satellite-entering-orbit-in-2017.html

Sputnik News – Unique 3D-Printed Siberian Satellite to Orbit Earth
https://sputniknews.com/science/201612261049011599-russia-satellite-3D-printer-experiments/

ISS Calendar http://spaceflight101.com/iss/iss-calendar/

Tomsk-TPU-120 CubeSat Video https://amsat-uk.org/2016/05/23/tomsk-tpu-120-cubesat-video/

Tomsk-TPU-120 CubeSat – Credit Tomsk Polytechnic University

The Russian space agency Roscosmos has released a video of the Tomsk-TPU-120 CubeSat commemorative transmission from the International Space Station.

The satellite was developed by students at the Tomsk Polytechnic University to test new space materials technology and is the world’s first space vehicle with a 3D-printed structure. It was launched from Baikonur to the ISS on March 31, 2016 in a Progress-MS-2 cargo vessel. It will be deployed by hand during a future Russian spacewalk (EVA), which is why unlike other CubeSats this one has a handle. The call sign of the satellite is RS4S.

In May 2016 the Tomsk Polytechnic University celebrated its 120th anniversary. As part of the celebrations on May 10/11 the Tomsk-TPU-120 was activated in the ISS and transmitted a greeting to Earth inhabitants, recorded by students of the university in 10 languages: Russian, English, German, French, Chinese, Arabic, Tatar, Indian, Kazakh and Portuguese.

The greeting message was transmitted once a minute on 437.025 MHz FM. One of the Kenwood transceivers on the ISS provided a cross-band relay, re-transmitting the signal on 145.800 MHz FM.

The video, recorded in the Russian ISS Service Module, shows the CubeSat and the amateur radio station.

Watch Микроспутник ТОМСК ТПУ 120 на МКС

The next Russian spacewalk appears to be EVA-43 which is expected to take place in early 2017 http://spaceflight101.com/iss/iss-calendar/

World’s First 3D-printed Satellite http://tpu.ru/en/news-events/760/

Dmitry R4UAB operates a WebSDR which you can use to receive the transmissions when the ISS is over Russia http://websdr.r4uab.ru/