Tag Archives: CubeSat

Feb 3 2012

Khartoum Amateur Radio Satellite Ground Station

University of Khartoum Satellite Ground Station

University of Khartoum Satellite Ground Station

Students at the  University of Khartoum are undertaking a CubeSat project KN-SAT1 and Nader, ST2NH. has made a video of their recently completed ground station.

KN-SAT1 is the first CubeSat to be built in Sudan. Its objectives are:

  1. To give students at Sudanese Unversities a hands-on space project experience.
  2. To document the process and skills and forward it to more students and post graduated engineers.
  3. To promote space engineering and space science education at other Sudanese educational institutes.
  4. Building, testing and launching the cube satellite.
  5. Monitoring and tracking the cube satellite.
  6. Telecommand the cube satellite.
  7. Collecting the telemetry and the mission data for analysis and evaluation.

Watch UOK-Satellite Ground Station .wmv

KN-SAT1 http://cubesat.uofk.edu/

Sudanese Amateur Radio and SWL History http://www.st2nh.com/sudanamateurradioandswlhistory

ST2NH http://www.st2nh.com/

Jan 31 2012

Video – Vega’s First Launch Campaign

A time-lapse video is available of the first Vega launch campaign that began November 7, 2011 at the ESA Spaceport in Kourou. Vega will carry eight student built amateur radio satellites.

This time-lapse shows the full assembly of the first Vega launcher at the launch pad, in preparation for its qualification flight. It starts with the transfer and installation of the P80 first stage from the Vega Booster Storage and Preparation Building to the launch pad, followed by the two solid-propellant second and third stages, the Zefiro-23 and Zefiro-9. The next step was to add the AVUM — Attitude & Vernier Upper Module — liquid-propellant fourth stage to the vehicle. The ‘upper composite’ — the fairing and payload — was moved to the pad on January 24 and integrated over night.

Watch Vega’s First Launch Campaign

Vega Satellite Deployments http://www.uk.amsat.org/4235

Student Amateur Radio Satellites on Vega http://www.uk.amsat.org/4180

Vega Masa-1 Elliptical Orbit Video http://www.uk.amsat.org/4119

Jan 31 2012

Video – Vega's First Launch Campaign

A time-lapse video is available of the first Vega launch campaign that began November 7, 2011 at the ESA Spaceport in Kourou. Vega will carry eight student built amateur radio satellites.

This time-lapse shows the full assembly of the first Vega launcher at the launch pad, in preparation for its qualification flight. It starts with the transfer and installation of the P80 first stage from the Vega Booster Storage and Preparation Building to the launch pad, followed by the two solid-propellant second and third stages, the Zefiro-23 and Zefiro-9. The next step was to add the AVUM — Attitude & Vernier Upper Module — liquid-propellant fourth stage to the vehicle. The ‘upper composite’ — the fairing and payload — was moved to the pad on January 24 and integrated over night.

Watch Vega’s First Launch Campaign

Vega Satellite Deployments http://www.uk.amsat.org/4235

Student Amateur Radio Satellites on Vega http://www.uk.amsat.org/4180

Vega Masa-1 Elliptical Orbit Video http://www.uk.amsat.org/4119

Jan 31 2012

Bright sparks redefine propulsion

CubeSats, like STRaND-1, are essential for the breakthrough of new technologies in the space industry. The relatively inexpensive CubeSat enables institutes and companies to test technologies and gain valuable flight heritage without risking millions (or even billions) of pounds of investment.

STRaND-1, the joint project between SSTL and the Surrey Space Centre (SSC), is one of these exciting experimental satellites and it’s not only its smartphone that makes it exceptional. Engineers at the Surrey Space Centre have also developed a unique mass and power saving plasma propulsion system to fly on the satellite. This system will be the first propulsive technology to provide very precise attitude control and pointing.

Pulsed Plasma Thruster flight hardware
Pulsed Plasma Thruster flight hardware

STRaND-1 will carry both a Resistojet and a Pulsed Plasma Thruster (PPT) module on board. The PPT will consist of eight micro thrusters; four located at the top of the satellite stack and four located at the bottom. The micro thrusters operate by discharging a discrete train of pulses. Each pulse is a plasma discharge that forms between two metal electrodes, much like a small lightning bolt or electrical spark. The spark erodes the metal from the electrodes and electromagnetics accelerate the eroded mass out of the nozzle, which produces thrust. This is known as the Lorentz force.

Surrey Space Centre has developed two ways of minimising mass and volume. Firstly, the electrodes which form the plasma discharge also function as the propellant. As metal is highly dense, more propellant can be stored in a smaller volume than that of conventional chemical propulsion systems. The total weight of the propellant for the whole STRaND-1 PPT system is just 10g.

Secondly, Surrey Space Centre’s novel discharge initiation system uses a mechanical contact trigger built out of a tiny piezoelectric motor only 5mm in length. This takes up less space than the conventional spark plug system which requires volume intensive circuitry.

The Pulsed Plasma Thruster module firing
The Pulsed Plasma Thruster module firing

Not only does SSC’s PPT module reduce mass and volume, it also uses less power than other propulsion systems. Between each pulse, energy is stored in a capacitor. This substantially reduces the power requirements for the thruster, making it perfect for small satellites such as STRaND-1. In fact, the power requirement for the system flying on STRaND-1 is only 1.5W, about the power needed to operate a bicycle light.

If successful, the STRaND-1 PPT will be the first propulsion system to provide full axis control on this class of satellite. Having an active propulsion system in orbit would open up new possibilities for future CubeSat missions like rendezvous and docking, and flyby inspection. The flight heritage and experience gained in using the PPT on STRaND-1 could then be transferred and scaled for other SSTL missions providing a low cost, mass and volume solution for future endeavours.

For updates on STRaND-1, visit the Facebook page or follow @SurreyNanosats on Twitter!

Read about STRaND-1 in a free sample issue of OSCAR News at http://www.uk.amsat.org/on_193_final.pdf

Jan 30 2012

Vega Satellite Deployments

Artists impression of Vega launch

Artists impression of Vega launch

Vega is presently scheduled to launch at 0900 UT on Thursday, Feb 9, with eight student built amateur radio satellites.

The launcher will first deploy the main payload,  the LARES the Laser relativity Spacecraft and will then make an additional firing of the final Attitude & Vernier Upper Module (AVUM) stage before deploying the secondary payloads. the planned timing for these deployments are as follows:

T0+ 4245.30secs first PPOD, with (in order of ejection) XatCobeo, e-st@r, and Goliat
T0+ 4255.30secs second PPOD, with (in order of ejection) Robusta, MaSat-1 and  PW-Sat
T0+ 4265.30secs third PPOD, with UniCubeSat only
These Cubesats will not deploy their antennas until >1800 seconds after they leave their PODS
T0+ 4275.30secs  AlmaSat-1 – it is not known how soon this spacecraft will start transmitting after deployment

Pre-launch TLEs have not yet been made available but all the teams will certainly appreciate reception reports on the day. All observers are being encouraged to join the CubeSat IRC chat channel to pass on their news and comments in realtime. Using the irc.freenode.net server please join the #cubesat channel. It is recommended that you change you nickname to “name_callsign”.

For frequencies of the eight student amateur radio satellites to be deployed by Vega see http://www.uk.amsat.org/4180

Vega Elliptical Orbit Video http://www.uk.amsat.org/4119

Jan 28 2012

Masat-1 Elliptical Orbit Video

Artists impression of Vega launch

Artists impression of Vega launch

Vega is planned to launch on February 9 from the ESA launch site at Kourou in the Caribbean. It will carry seven amateur radio CubeSats and an amateur radio Microsatellite called ALMASat.

This HD clip shows how one of those CubeSats, Masat-1 (437.345 MHz), is going to orbit around Earth. You can see the satellite establishing contact with the primary ground station at BME, joined by the radio amateurs in Europe and all over the World. The radio contact is possible only if the satellite is above the Horizon at the given location. This is symbolized with thin green lines between the satellite and the ground stations, represented by coloured dots on the Globe.

Everybody is welcome to join in recieving the satellite using the ground station software freely downloadable from the Masat-1 website!

Watch Masat-1 Elliptical Orbit and Pass over European Ground Stations

The Masat-1 Ground Station Client Software was prepared to process the 437.345 MHz GFSK 625/1250 bps transmission received from the satellite Masat-1. The software provides the following functions:

– Audio demodulation
– Packet decoding
– Packet data visualization
– Frequency waterfall plot to aid radio tuning

Download the software and a test WAV file from http://cubesat.bme.hu/en/foldi-allomas/kliens-szoftver/

Frequencies and links for the amateur radio satellites on Vega are at http://www.ne.jp/asahi/hamradio/je9pel/esa9cubf.htm

IARU Amateur Satellite Frequency Coordination pages http://amsat.org.uk/iaru/